Concrete and mortar, Moisture testers

HI-800

HI-800

The HI-800 Concrete & Mortar Moisture Tester has been designed to enable measurement of moisture at depths of up to 150mm. This unit is used to determine moisture in applications such as injection of epoxy resins into Concrete for fixing of Mortar or Tiles. If moisture is too high where the epoxy is injected, adhesion will be unsatisfactory.

Applications: Concrete, Mortar
Measurement depth: Up to 50 mm from the surface (up to 150 mm using optional equipment)
Measurement method: Electrical Resistance Method
Product type: Concrete and mortar
Display format: Digital (LCD, smallest displayed unit 0.1%, RH 0.1 °C)
Measurement range: Concrete: 0-10%, Mortar: 0-15%
Temperature correction: Automatic or Manual Temperature Correction
Power supply: 4 x 1.5 V Batteries (AA size Alkaline)
Dimensions: 75 (W) × 145 (D) × 31 (H) mm
Weight: 1 kg

Concrete and mortar, Moisture testers

HI-520-2

HI-520-2

The HI-520-2 concrete and mortar moisture tester can measure moisture contents by simply placing the moisture sensor against objects to be measured thanks to the introduction of high-frequency capacitance method for measurement. In addition to the functions of the conventional type, HI-520 , which has been widely used in the industry, this product has an enlarged screen with embedded backlight, and ergonomically redesigned housing and switches, i.e. HI-520-2 has become a more user-friendly instrument.

Applications: Concrete, Mortar, ALC, Artificial lightweight aggregate concrete, Gypsum board, Calcium silicate board
Functions: Temperature correction, backlight, upper limit of moisture content alarm setting, hold, user calibrations (8 pcs.)
Measurement method: High frequency capacitance
Product downloads: HI-520-2 brochure, HI-520-2 manual
Product type: Moisture testers, Concrete and mortar
Accuracy: ± 0.5% (Concrete, Mortar)
Display: Digital (LCD, smallest displayed unit 0.1%)
Measurement range: Concrete: 0-12%, Mortar: 0-15%, ALC: 0-100%, Artificial Lightweight aggregate concrete: 0-23%, Gypsum board: 0-50%, Calcium silicate board: 0-15%, D mode:0-1999, S mode: 0-1100
Accessories supplied: 9 V alkaline battery (006P), soft case (with strap), operating manual
Options: Data logger software, HDL-01 (with USB cable)
Power supply: 9 V (006P Alkaline battery)
Dimensions: 72 (W) × 150 (D) × 120 (H) mm
Weight: 0.39 kg

Concrete and mortar

HI-330

HI-300

With the HI-330, you can easily find the moisture content and single unit water volume on-site by simply placing the weight-screened mortar (or sand) into the sample tray and pressing the measurement key. You can even send the control data information to a printer. Furthermore, in addition to measuring the moisture content of mortar, the HI-330 can also measure the surface water ratio of fine aggregates.

Applications: Mortar (things that have been weight-screened by wet Concrete) Fine aggregates
Functions: Individual moisture mass estimate, Cement composition estimate (comparing water vs. cement), User scale registration, Combination data registration, Average value, 126 memory slots, 15 minute auto power-off
Measurement method: Capacitance type
Product type: Concrete and mortar
Accuracy: Mortar: ± 0.5% (repeated precision) Aggregates used with the HI-330: ± 0.3% (repeated Precision)
Display: Digital (LCD, smallest displayed unit 0.1%)
Measurement range: Mortar: 20-40% (volume moisture rate), Aggregates: above 15
External communications: RS-232C interface
Accessories supplied: Sample case, Additional connector, Dummy, AC adapter, Carrying case
Options: Printer (VZ-350)
Power supply: 100 V AC (50/60 Hz) or 6 x 1.5 V (AA size Alkaline batteries)
Dimensions: 300 (W) x 264 (D) x 197 (H) mm
Weight: 2.5 kg

Concrete and mortar

HI-300

HI-300

With the HI-300, you can easily find the moisture content and single unit water volume on-site by simply placing the weight-screened mortar into the sample tray and pressing the measurement key. You can even send the control data information to a printer. Furthermore, in addition to measuring the moisture content of mortar.

Applications: Mortar (things that have been weight-screened by wet Concrete)
Functions: Individual moisture mass estimate, Cement composition estimate (comparing water vs. cement), User scale registration, Combination data registration, Average value, 126 memory slots, 15 minute auto power-off
Measurement method: Capacitance type
Product type: Concrete and mortar
Accuracy: Mortar: ± 0.5% (repeated precision) Aggregates used with the HI-330: ± 0.3% (repeated Precision)
Display: Digital (LCD, smallest displayed unit 0.1%)
Measurement range: Mortar: 20-40% (volume moisture rate)
External communications: RS-232C interface, USB (for PC)
Accessories supplied: Sample case, Additional connector, Dummy, AC adapter, Carrying case
Options: Printer (VZ-350)
Power supply: 100 V AC (50/60 Hz) or 6 x 1.5 V (AA size Alkaline batteries)
Dimensions: 300 (W) x 264 (D) x 197 (H) mm
Weight: 2.5 kg