Thickness

LZ-990 ESCAL

LZ-990 ESCAL

This dual-type coating thickness tester LZ-990 “ESCAL” is a simple, compact coating thickness tester. It is possible to measure the thickness of films coated onto ferrous and nonferrous substrates. Further, it can automatically determine the type of substrate material and switch to the required measurement mode.

Applications: Non-magnetic coating on ferrous metal substrate and insulating coating on non-ferrous metal substrate
Functions: Application memory (calibration curves), Measured data memory, Data delete, Data output, Lot classification, Auto power ON/OFF, Clock, Upper and lower limits, Statistical calculations, Backlight, Unit setting, etc, total 15 functions
Measurement method: Uses both electromagnetic induction and eddy-current methods (with automatic selection function)
Product downloads: LZ-990 ESCAL brochure, LZ-990 ESCAL manual
Product type: Thickness coating testers
Accuracy: <50 µm ± 1 µm, 50 µm to <1000 µm ± 2%, ≥ 1000 µm to <2000 µm ± 3%
Application memory: 8 Types of electromagnetic or eddy current methods, total 16 Calibration curves
Data memory: Approx. 1,000 points
Display: Digital (Backlit LCD, smallest displayed unit 0.1 µm)
Measurement range: 0-2000 µm or 0-80 mils
Resolution: <100 µm, 0.1 µm; ≥ 100 mm, 1 µm
Standard method: Electromagnetic: JIS K5600-1-7, JIS H8501, JIS H0401/ISO 2808, ISO 2064, ISO 1460, ISO 2178, ISO 19840/BS 3900-C5/ASTM B 499, ASTM D 7091-5. Eddy-current: JIS K5600-1-7, JIS H8680-2, JIS H8501/ISO 2808, ISO 2360, ISO 2064, ISO 19840/BS 3900-C5/ASTM D 7091
Operating environment: 0-40 °C
External communications: RS-232C interface, USB (for PC)
Accessories supplied: Zero plate holder (Ferrous metal substrate, Aluminum substrate), Calibration foils (50, 100, 1000 _m), Carrying pouch, 2 x 1.5 V Batteries (AAA size Alkaline), Instructions, Wriststrap
Options: Calibration foils (thicknesses other than those available as standard accessories), Measuring stand LW- 990, Printer VZ-330, Printer cable,USB PC cable, Transparent protective cover, Data Logger Software (LDL-01)
Power supply: 2 x 1.5 V Batteries (AAA size Alkaline)
Power consumption: 40 mW (when backlight OFF)
Dimensions: 82 (W) × 100 (D) × 32 (H) mm
Weight: 0.16 kg

Thickness

LZ-373

LZ-373

The LZ-373 is a thickness tester capable of measuring the thickness of coated films on ferrous and non-ferrous metallic substrates. Designed for workplaces handling a variety of substrates and a variety of coatings, this multi-purpose coating thickness tester was born from Kett’s design philosophy of meticulous attention to detail.

Applications: Non-magnetic coating on ferrous metal substrate and insulating coating on non-ferrous metal substrate
Functions: 16 types of internal functions
Measurement method: Uses both Electromagnetic Induction and Eddy-current Methods
Product downloads: LE/LH/LZ-373 manual
Product type: Thickness coating testers
Accuracy: <50 µm ± 1 µm, 50 µm to <1000 vm ± 2%, ≥ 1000 µm ± 3%
Application memory: 50 types of electromagnetic calibrations curves, 50 types of eddy current calibration curves.
Data memory: Approx. 39,000 points
Display: Digital (Backlit LCD, smallest displayed unit 0.1 mm)
Measurement range: Electromagnetic: 0-2500 µm or 99.0 mils, Eddy-current: 0-1200 µm or 47.0 mils
Probe: Single-point constant-pressure type probe (LEP-J, LHP-J)
Resolution: <100 µm, 0.1 µm; ≥ 100 µm, 1 µm
Standard method: Electromagnetic: JIS K5600-1-7, JIS H8501, JIS H0401/ISO 2808, ISO 2064, ISO 1460, ISO 2178, ISO 19840/BS 3900-C5/ASTM B 499, ASTM D 7091-5. Eddy-current: JIS K5600-1-7, JIS H8680-2, JIS H8501/ISO 2808, ISO 2360, ISO 2064, ISO 19840/BS 3900-C5/ASTM D 7091
Operating environment: 0-40 °C
External communications: RS-232C interface
Accessories supplied: Calibration foils, Ferrous metal substrate, Aluminium substrate, Carrying case, 4 x 1.5 V batteries (AA size Alkaline)
Options: Calibration foils (thicknesses other than those available as standard accessories), Measuring stand LW-990
Power supply: 4 x 1.5 V Batteries (AA size Alkaline)
Battery life: 100 hrs (constant operation, backlight OFF)
Power consumption: 80 mW (when backlight OFF)
Dimensions: 75 (W) × 145 (D) × 31 (H) mm
Weight: 0.34 kg

Thickness

LZ-200J

LZ-200J

The LZ-200J is a portable Dual-type Coating Thickness Tester, equipped with both Electromagnetic and Eddy-current testing methods. This unit also has an internal Printer. The LZ-200J can quickly and easily handle coating thickness measurements of various types of coatings on Iron and Steel or non-ferrous substrates. Additionally, the LZ-200J offers many valuable functions, such as calibration, memory, limit setup, and a statistical calculation function, which at the press of a button allows you to find the average value, standard deviation, and largest and smallest values measured.

Applications: Non-magnetic coating on iron and steel (ferrous) substrates and Insulating coatings on non-ferrous substrates
Measurement method: Electromagnetic induction/Eddy-current
Product downloads: LE/LH/LZ-200J manual
Product type: Thickness coating testers
Accuracy: Electromagnetic: Under 15 µm: ± 0.3 mm, 15 µm or greater: ± 2%. Eddy-current: Under 50 µm: ± 1 µm, 50 µm or greater: ± 3%
Display: Digital (LCD, smallest displayed unit 0.1 mm)
Measurement range: Electromagnetic: 0-1500 µm or 60.00 mils. Eddy-current: 0-800 µm or 32.00 mils
Probe: One-point contact fixed pressure (LEP-J, LHP-J)
Resolution: 0.1 µm (less than 100 µm), 1.0 µm (100 µm or greater)
Statistical functions: Number of measurements, Average value, Standard deviation, Maximum value, Minimum value, Block numbers
External communications: RS-232C interface
Accessories supplied: Calibration plate, Iron substrate, Batteries (1.5 V, AA size Alkaline), Probe adapter, AC adapter, Printer paper, Carrying case
Options: Data Management Software “McWave Series” and “MultiProp” (McWave Series and MultiProp are products of CEC Co.)
Power supply: 100 V AC (50/60 Hz) or 6 x 1.5 V (AA size Alkaline batteries)
Dimensions: 120 (W) x 250 (D) x 55 (H) mm
Weight: 1 kg

Thickness

LH-373

LH-373

The LH-373 is a coating thickness tester capable of measuring the thickness of insulating coatings on non-ferrous metal substrates. While having the same functions as the LE-373, which measures coatings on ferrous metal substrates, it is also capable of precisely measuring comparatively thin coatings, such as alumite.

Applications: Insulating coating on non-ferrous metal substrate
Functions: 16 types of internal functions
Measurement method: Eddy-current Method
Product downloads: LE/LH/LZ-373 manual
Product type: Thickness coating testers
Accuracy: <50 µm ± 1 µm, 50 µm to <1000 µm ± 2%, ≥ 1000 µm ± 3%
Application memory: 100 types of calibrations curves
Data memory: Approx. 39,000 points
Display: Digital (Backlit LCD, smallest displayed unit 0.1 µm)
Measurement range: 0-1200 µm or 47.0 mils
Probe: Single-point constant-pressure type probe (LHP-J)
Resolution: <100 µm, 0.1 µm; ≥ 100 µm, 1 µm
Standard method: JIS K5600-1-7, JIS H8501, JIS H0401/ISO 2808, ISO 2064, ISO 1460, ISO 2178, ISO 19840/BS 3900-C5/ASTM B 499, ASTM D 7091-5
Operating environment: 0-40 °C
External communications: RS-232C interface
Accessories supplied: Calibration foils, Aluminium substrate, Carrying case, 4 x 1.5 V batteries (AA size Alkaline)
Options: Calibration foils (thicknesses other than those available as standard accessories), Measuring stand LW-990
Power supply: 4 x 1.5 V Batteries (AA size Alkaline)
Battery life: 100 hrs (constant operation, backlight OFF)
Power consumption: 80 mW (when backlight OFF)
Dimensions: 75 (W) × 145 (D) × 31 (H) mm
Weight: 0.34 kg

Thickness

LE-200J

LE-200J

The LE-200J is a portable Electromagnetic Coating Thickness Tester with a built-in Printer. This unit can accurately and quickly measure many items such as magnetic plating (electrolysed nickel plating not included), coating, painting, and lining, without injuring or damaging the item. Furthermore, you can print out the measurement results on-site with the internal printer.

Applications: Non-magnetic coating on Iron and Steel (ferrous) substrates
Measurement method: Electricomagnetic Induction Method
Product downloads: LE/LH/LZ-200J manual
Product type: Thickness coating testers
Accuracy: Under 15 µm: ± 0.3 µm, 15 µm or greater: ± 2%
Display: Digital (LCD, smallest displayed unit 0.1 µm)
Measurement range: 0-1500 µm or 60.00 mils
Probe: One-point contact fixed pressure (LEP-J)
Resolution: 0.1 µm (less than 100 µm), 1.0 µm (100 µm or greater)
Statistical functions: Number of measurements, Average value, Standard deviation, Maximum value, Minimum value, Block numbers
External communications: RS-232C interface
Accessories supplied: Calibration plate, Iron substrate, Batteries (1.5 V, AA size Alkaline), Probe adapter, AC adapter, Printer paper, Carrying case
Options: L Probe LEP-21L(Probe for use on the inside surface of pipes), Data Management Software “McWave Series” and “MultiProp” (McWave Series and MultiProp are products of CEC Co.)
Power supply: 100 V AC (50/60 Hz) or 6 x 1.5 V (AA size Alkaline batteries)
Dimensions: 120 (W) x 250 (D) x 55 (H) mm
Weight: 1 kg