Category: Infrared moisture balance

The FW-100 is a windshield for the FD Series Infrared Moisture Determination Balances. It is fitted with a deodorising function. When an infrared moisture balance is placed within, the FW- 100 reduces the effect of external air currents on the high precision balance. Depending upon the sample type, an unpleasant odour may be emitted during moisture measurement. The deodorizing filter incorporated in the FW-100, reduces any odour.

Product type: Infrared moisture balances
Accessories supplied: Upper Lid (includes shutter, 2 x deodorising filters), 2 x Side panels, Rear panel, Front face metal fixtures
Applicable devices: FD-800, FD-720, FD-620, FD-610, FD-600, FD-240
Replacement parts: Deodorising filter
Dimensions: 333 (W) x 465 (D) x 509 (H) mm
Weight: 5.3 kg

The FM-300A Micro Moisture Analyzer allows the user to accurately measure samples as low as two parts per million (2ppm). Unlike Karl Fisher Titrators, no chemical reagents are used, therefore only moisture is measured (as chemical interaction is eliminated). The FM-300A eliminates the cost of reagents and preparation necessary for Karl Fisher Titrators, as well as the expensive disposal cost of the various wastes.

Measurement method: Filter Moisture Adsorption
Measurement mode: Time/Automatic measurement
Product type: Infrared moisture balances
Heat source: 400 W EC Heater
Resolution: 0.01 mg/2 ppm (When sample weighs 5 g)
Sample weight: 10 mg-5 g
External communications: RS-232C interface
Options: Printer (VZ-330 w/VZC-14 cable), Data logger software (PDL-01)
Power supply: 100-120 V AC/220-240 V AC (50/60 Hz)
Dimensions: 585 (W) x 520 (D) x 480 (H) mm
Weight: 37.0 kg

The FD-800 employs a dual temperature sensing method to achieve highly precise moisture measurements. In addition to the thermistor that measures the environment temperature within the drying chamber, it is mounted with a radiation thermometer that measures the sample temperature directly without contact.

Measured components: Moisture, Solid content, Weight
Measurement method: Detection of weight loss by heating & drying
Measurement mode: Automatic stop mode, Timer stop mode, Rapid drying mode, Equilibrium drying mode, Step drying mode, Predictive (comparative) measurement mode
Product downloads: FD-800 brochure, FD-800 manual
Product type: Infrared moisture balances
Heat source: Mid-wave infrared quartz heater (200 W x 2)
Measurement range: 0-100% (wet base, solid content); 0-500% (dry base)
Resolution: Moisture percentage 0.01% / 0.1%; Weight 1 mg Temperature setting range for thermistor (T1): 30-180 °C (1 °C interval); for radiation thermometer (T2) 30-250 °C (1 °C interval)
Repeatability: Sample with a weight of 5 g or higher : 0.05%; Sample with a weight of 10 g or higher : 0.02%)
Sample pan: Stainless steel (130 mm in diameter, 13 mm in depth)
Sample weight: 0.1-120 g (optional weight sampling)
Operating environment: Temperature 5-40 °C, Humidity max of 85% RH, Pollution degree 2, Altitude up to 2000 m
External communications: RS-232C interface
Accessories supplied: Spare sample pan, Aluminum sheets, etc
Options: Printer Set (VZ-330, Printer Cable: VZC-14) 10x Printer paper rolls, 500x Aluminum sheets Radiation thermometer calibration kit GF-200 (digital thermometer, standard heating sample), Data logger software “FDL-02” (RS-232C cable, USB-RS232C conversion ca
Power supply: 100-120 V AC/220-240 V AC (50/60 Hz)
Power consumption: Max. 900 W
Dimensions: 220 (W) x 415 (D) x 190 (H) mm
Weight: 4.5 kg

The FD-720 Infrared Moisture Determination Balance is an advanced new model. It features a highly accurate analytical balance and newly designed long life (20,000 to 30,000 hours) Mid-wave Infrared quartz heater. The FD-720 offers 6 different measurement modes. The unique Bias function allows adjustment of the displayed measurement to correlate with data obtained by other measuring methods or testers. 

Measured components: Moisture, Solid content, Weight
Measurement method: Detection of weight loss by heating & drying
Measurement mode: Automatic operation mode, Timed operation mode (1~240min or continuous), High-speed drying mode, Low-speed drying mode, Stepped drying mode (max of 5 steps), Predictive measuring mode
Product downloads: FD-720 brochure, FD-720 manual
Product type: Infrared moisture balances
Heat source: Mid-wave infrared quartz heater (200 W x 2)
Measurement range: 0-100% (wet base, solid content); 0-500% (dry base)
Resolution: 0.01%, 1 mg
Repeatability: Sample with a weight of 5 g or higher: 0.05%; Sample with a weight of 10 g or higher: 0.02%
Sample pan: Stainless steel (130 mm in diameter, 13 mm in depth)
Sample weight: 0.5-120g
Temperature range: 30-180 °C
Operating environment: 5-4 0°C, less than 85% RH (non-condensing), pollution degree 2, altitude up to 2000 m
External communications: RS-232C interface
Accessories supplied: Sample dish x 2, Sample dish handler x 2, Wind shield, Sample dish tray, Spoon and spatula set, Spare fuses (T8A 250 V) x 2, Power cord, Aluminum sheets (20 pcs) x 2, Operating manual
Options: Printer set ( Printer VZ-330), Data logger software (KDL-01)
Power supply: 100-120 V AC/220-240 V AC (50/60 Hz)
Power consumption: Max. 900 W
Dimensions: 220 (W) x 415 (D) x 190 (H) mm
Weight: 4.5 kg

The FD-660 Infrared Moisture Analyzer measures moisture content through the detection of weight loss by heating & drying. It is extremely similar to the Loss on Drying Test, one of the official standard measurement methods, forming the basis of measuring moisture content.The moisture contents of almost all of samples, regardless of their types and shapes, can be measured.

Measurement method: Detection of weight loss by heating & drying
Measurement mode: Automatic halting mode. Timed halting mode (1 to 120 min.)
Product downloads: FD-660 brochure, FD-660 manual
Product type: Infrared moisture balances
Display: LCD
Heat source: Organic carbon heater (280 W x 2)
Measurement range: 0-100% (wet base, solid content); 0-500% (dry base)
Resolution: Moisture content/Solid content: 0.1% or 0.01% (selectable). The indication of 0.01% is not guaranteed for accuracy.
Sample pan: Stainless steel (110 mm in diameter, 11 mm in depth)
Sample weight: 1-80 g (optional weight sampling format)
External communications: RS-232C interface
Options: Printer set (includes a printer “VZ-330”, a printer interface cable “VZC-14”, printer paper, and an AC adapter), printer paper (10 rolls), package of aluminium foil sheets (500 sheets), RS-232C cable “VZC-52”, data logger software “FDL-02”, sample crush
Power supply: 100-120 V AC/220-240 V AC (50/60 Hz)
Power consumption: Max. 900 W
Dimensions: 222 (W) x 360 (D) x 196 (H) mm
Weight: 3.2 kg